|
|
Model # 1578 (UPC # 833250001578)
USB 2.0 + 1394 COMBO PCI CARD
(4 Ext. + 1 Int.) USB 2.0 + (2 Ext. + 1 Int.)
1394 Ports
Features:
Easy
plug-n-play connectivity and set-up
USB 2.0 data
transfer rate up to 480 Mbps, IEEE 1394
data transfer rate up to 400 Mbps
Supports new
USB 2.0 devices while being fully
backward-compatible with USB 1.1 devices
Supports
Windows 98SE, ME, 2000, and XP
4 External
Type A USB 2.0 Ports
1 Internal
Type A USB 2.0 Port
2 External
1394 Ports
1 Internal
1394 Port
1 additional
port (pins) coming out from J3 For USB
2.0
1 additional
port (pins) coming out from JP3 For
FIREWIRE
J3 & JP3 is
for those people have USB and Firewire
port in the front of their computer case.
You can also
plug in the internal power from your
Power Supply directly to the back of the card for
added power to the card
System Requirement:
IBM-Compatible PC with 300MHz or faster
processor
Microsoft
Windows 98SE, ME, 2000 and or XP
Available
PCI slot
CD-ROM drive
for driver installations
Specifications:
PCI-to-PCI Bridge
PCI Local
Bus Specification Rev. 2.1
PCI Mobile
Design Guide Rev. 1.1 features
Compact PCI
Hot Swap Friendly support
Small
footprint PQFP 128-pin package
Support
3.3V, 32-bit, 33MHz operation
Synchronous
Primary and Secondary Ports
Provides
arbitration support for bus masters
USB 2.0:
Compliant
with USB Specification Revision 2.0
Data
Transfer rate can be 1.5/12/480Mbps
Compliant
with OHCI Specification Rev. 1.0a
Four down
stream port can handle high-speed
(480Mbps), full-speed (12Mbps) and low-speed
(1.5Mbps)
32-bit 33MHz
host interface compliant to PCI
Specification release 2.2
Support PCI-Bus
Power Management Interface
Specification release 1.1
Support up
to 127 devices
Support
devices hot swap and wake-up
Four
external ports and one internal port
Pin header
of Single port for cabling to front panel
(Cable not included)
IEEE 1394:
Compliant
with IEEE 1394 OHCI Specification Revision
1.0
Data
Transfer rate can be 100/200/400Mbps
Compliant
with protocol enhancement as defined in
P1394A draft 2.0
32-bit 33MHz
host interface compliant to PCI
Specification release 2.2
Support PCI-Bus
Power Management Interface
Specification release 1.1
32-bit CRC
generation and checking for
receive/transmit packets
Hot
pluggable, dynamic reconfiguring of up to 63
nodes on the bus, no need to turn off the system
while adding or removing 1394 devices externally32-bit
DMA channels for physical memory read/write
2 external
ports
Pin header
of Single port for cabling to front panel
(Cable not included)
1 internal 4
pin connector for additional power
connections (If needed)
Package Included:
One PCI
COMBO Card
CD-Driver
for Windows 98se and above
Package Size:
Weight: 1.00
lbs. Package size: 8.75 x 2 x 6.25
(inches)
|
