|
|
Model # 1318 / 1318v (UPC 833250001318)
2 Port SATA RAID + 4 port USB 2.0 + 3 port
1394a PCI Card 1.5 Gb/s (1500 Mb/s)
Support RAID 0 and 1
Descriptions:
PCI SLOT SAVER Technology Integrates Serial
ATA RAID (1500 Mbps), USB 2.0 (480Mbps)and
IEEE 1394 (400Mbps) in one PCI Host Adapter to
upgrade your computer to have all the advanced
features!
Features:
Provides
Dual independent Serial ATA channels
Provides
RAID 0 and RAID 1
Provides
Three IEEE 1394 (Firewire) ports
(2 External + 1 Internal)
Provides
Four USB2.0 / USB1.1 ports
(3 External + 1 Internal)
Supports
Windows Drivers
PCI
Compliant
with PCI Specification, revision 2.2
32 bit,
33MHz fully compliant PCI host interface
Integrated
PCI DMA engine
High Speed Serial ATA RAID
Dual high
speed serial ATA interface ports, each
supporting 1st generation Serial ATA data
rates(1.5Gb/s)
Provides
RAID 0 (Stripping) to greatly increase the
performance of data transfer by simultaneously
writing data to 2 drives
Provides
RAID 1 (Mirroring) to protect the data from
a disk failure by writing identical data on 2 drives
Fully
compliant with Serial ATA 1.0 specifications
Independent
256-byte FIFO (32 bit * 64 deep) per
Serial ATA channel for host reads and writes
Supports
Spread Spectrum in receiver
Features
Serial ATA to PCI interrupt masking
Features
Watch Dog Timer for fault resiliency
Acts as
NON-RAID when BIOS NOT configured as
RAID
USB 2.0
Compliant
with Universal Serial Bus Specification
Revision 2.0 (Data Rate 1.5/12/480 Mbps)
Compliant
with Open Host Controller Interface
Specification for USB Rev 1.0a
Compliant
with Enhanced Host Controller Interface
Specification for USB Rev 0.95
Provides
Four USB2.0 / USB1.1 ports (3 External + 1
Internal)
All USB
ports can handle high-speed (480 Mbps),
full-speed (12 Mbps), and low-speed (1.5 Mbps)
transaction
IEEE 1394 (Firewire)
Compliant
with IEEE 1394 Open Host Controller
Interface specification release 1.1 and IEEE Std.
1394a-2000
Provides
three 1394 ports at 100/200/400 Mbps
Built-in
FIFO for isochronous transmit (2048 bytes),
asynchronous transmit (2048 bytes), and receive
(3072 bytes)
32-bit CRC
generation and checking for
receive/transmit packets
Requirement:
Pentium or
equivalent PC with one available PCI slot
Windows
98SE/NT4.0/ME/2000/XP
Package Size:
UPC #
833250001318
Weight: 1.2
lbs
Package
size: 8.5 x 6 x 2 (inches)
Package Included:
One Combo
SATA PCI Card
One Serial
ATA driver diskette
Quick
Installation guide
|
